Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Uniondale, NY
Gate work in Uniondale runs into conditions most towns don’t deal with. The housing stock here went up between the 1940s and 1960s, which means a lot of original iron and chain-link gates sitting on footings that were never poured for freeze-thaw cycles. Add salt air from the coast and you get rust, misalignment, and motor strain that shows up seasonally, especially near the Southern State Parkway. Carver Gate Repair handles gate repair, installation, and motor repair across Uniondale, with written prices before any work starts. Call (516) 559-4870 and you’ll talk to a person, not a recording.
Why Uniondale Homes Are Different
Uniondale is a mix of mid-century single-family homes and garden apartment complexes, and the gate work reflects that split. A homeowner on a residential block in the Uniondale Gardens neighborhood is often dealing with a legacy manual gate that’s been patched with DIY fixes for years, while a property manager across town needs a sliding gate motor that cycles dozens of times a day for parking access. The common thread is age. Many of these gates are original to post-war construction and were set without proper concrete footings, so the ground shifts through winter and spring and the gate pulls out of alignment. That’s why we see a spike in realignment calls every March and April.
Coastal Long Island weather does the rest. Salt air accelerates rust on iron and steel hardware, and freeze-thaw cycles fatigue hinges and operator arms faster than inland towns. For automatic gates near the Southern State Parkway, the added humidity and temperature swings mean limit switches and loop detectors fail more often than they would a few miles north. None of this is exotic. It just means a Uniondale gate job needs someone who has seen these specific failures before and carries the right parts on the truck.
Styles & brands we work with
Our Main Uniondale Services
The two calls we get most from Uniondale homeowners are repair and motor work, but installation is a close third as older gates finally reach the end of their service life. Each service has its own Uniondale page with full detail.
Gate Repair in Uniondale
Repair work in Uniondale usually starts with a sagging gate, a hinge that’s pulling out of a rotted post, or a latch that no longer lines up. On the older iron gates common in this area, the root cause is frequently the footing, not the hardware. We’ll assess whether the post is solid, whether the gate can be rehung square, and whether a patch makes sense or the gate has reached the point where replacement is cheaper over two years. Every repair gets a written price before work begins and a written guarantee good for a full year. See Gate Repair in Uniondale for specifics.
Gate Installation in Uniondale
New gate installation in Uniondale often means replacing a 60-year-old iron gate with a welded steel or aluminum design matched to the driveway width and post condition. We handle the full scope: removing the old gate, setting or repairing footings, hanging the new gate, and adjusting it so it swings or slides cleanly through the full arc. On Uniondale properties where the original footings were shallow, we pour new ones to current standards so the gate doesn’t shift with the first freeze. Gate Installation in Uniondale covers the process and what to budget.
Gate Motor Repair in Uniondale
Automatic gate openers in Uniondale fail in predictable ways: limit switches drift, loop detectors stop reading vehicles, and articulating arms bind when the gate itself is out of alignment. On Viking, DoorKing, and Elite systems, we stock the common boards, arms, and safety edges locally so most motor repairs are done in one visit. If the motor has failed outright, we’ll give you a replacement price before removing anything. Gate Motor Repair in Uniondale has full detail on motor replacement costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Uniondale
Our technicians work on nine gate-motor brands, including Viking, Ghost Controls, DoorKing, and Elite, so the parts and programming match the system already on the property. We stock common control boards, remotes, and safety edges in local inventory for faster turnaround. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Uniondale, NY
| Service | Typical range in Uniondale |
|---|---|
| Gate realignment & hinge repair | $180 – $340 |
| Welded steel gate repair | $250 – $475 |
| Gate post reset (concrete footing) | $300 – $550 |
| Chain-link gate repair | $150 – $300 |
| Sliding gate roller replacement | $220 – $420 |
| Gate operator limit switch replacement | $185 – $325 |
| Loop detector replacement | $240 – $450 |
| Swing gate operator motor replacement | $550 – $950 |
| Sliding gate operator motor replacement | $600 – $1,050 |
| Full single swing gate installation | $1,900 – $3,800 |
| Full sliding gate installation | $2,400 – $4,900 |
| New gate motor with installation | $850 – $1,600 |
What pushes a Uniondale job toward the top of those ranges is usually the footing. If a post has to be dug out and re-poured, that’s labor and concrete on top of the gate work. Salt corrosion on older iron can also add time when seized hardware has to be cut rather than unbolted. Whatever the number is, you’ll see it in writing and confirm it before we start, and that number does not change at the door.
Neighborhoods We Serve in Uniondale
We work across Uniondale, from the single-family blocks around Uniondale Gardens to the apartment complexes with sliding parking gates along Front Street. Our dispatch is coordinated from the brand’s New York City office, with crews serving Uniondale locally, so response times stay consistent across the area.
- Uniondale Gardens
- North Uniondale
- East Uniondale
- Areas near the Southern State Parkway
- Front Street corridor
Service Area – Cities Near Uniondale
Beyond Uniondale, we serve neighboring Nassau County communities with the same written-price standard. If your property is a few minutes outside Uniondale, you’re still in our service area. We regularly handle gate repair and installation work in Hempstead, NY, East Meadow, NY, Merrick, NY, and Freeport, NY.
Serving Uniondale, NY - Our Local Coverage Area
We’re based in the Uniondale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Uniondale
For repair and motor failures in Uniondale, we typically dispatch same day or next day depending on call volume and the time you reach us. Our phones are answered by a live person 24/7, so you’ll know the schedule before you hang up. Call (516) 559-4870 for current availability.
Most gate repairs and motor replacements do not require a permit in Uniondale, since they are repairs to existing structures. New installations with new footings may, depending on the scope. We’ll tell you if your job is likely to need one before any work is scheduled.
Yes. Sliding and swing gates on Uniondale garden apartment parking areas are a regular part of our work, including loop detectors, safety edges, and the motor systems behind them. Commercial property managers get the same written guarantee and upfront pricing as any residential caller.
If your gate is sagging, stuck, or the motor is grinding, call Carver Gate Repair at (516) 559-4870. We’ll give you a straight answer, a written price, and a time we’ll be there. Free estimates on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Uniondale Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.