Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Uniondale
Gate repair in Uniondale usually means one of two things: a sagging panel that no longer closes square, or a motor that stopped responding. A typical service call runs $145 – $285 for hinge and post work, while operator and control board replacement runs $360 – $890 depending on the brand and whether safety retrofits are included. Our crew covers the area from Uniondale Gardens to the blocks off Front Street, and we answer the phone around the clock at (516) 559-4870. If a gate is stuck open, we treat it as a security problem, not a scheduling problem.
Why Carver Gate Repair Hempstead Is Uniondale’s Preferred Gate Repair Company
Uniondale homeowners don’t need another contractor who treats a gate as a side job. Our Gate Repair team works only on gates and operators, and we carry the parts that older Uniondale properties actually need: heavy barrel hinges, replacement post caps, limit switches, and control boards matched to LiftMaster, FAAC, and Viking equipment. Every technician who arrives at a Uniondale home is background-checked, uniformed, and working to the Garrison Code: a written price before the first tool comes off the truck, a guarded site, and a repair that holds for a full year or we come back at no charge.
We know Uniondale’s older gates. The swing panels on 1940s and 1950s lots often hang on original iron posts that have never been reset. The apartment complexes near Nassau Road use sliding gates that take a beating from daily traffic. And the salt air that comes up from the water works on every exposed piece of metal. That’s not a generic service pitch – that’s what we see on jobs here week after week.
Our coverage reaches all of Uniondale, from the residential streets off Jerusalem Avenue to the commercial properties along Hempstead Turnpike. A live person answers 24/7, not a voicemail box. When a gate stops working at 9 p.m., the homeowner gets a real conversation with someone who can dispatch help, not a promise to call back Monday.
Styles & brands we work with
Wrought Iron Gate Repair in Uniondale
Wrought iron gate repair in Uniondale typically runs $180 – $420 for hinge replacements, post reinforcement, and panel straightening on a mid-size swing gate. The bulk of that cost is labor and materials for resetting or re-setting posts into concrete footings – the original posts on post-war Uniondale homes were often set shallow, and once they lean, the whole gate follows. A partial rebuild including replacing a rotted post below grade and re-hanging the existing panel usually lands between $450 and $900.
Post and Hinge Work on Older Gates
The hinge post is where most wrought iron gate failures start. On a 1950s home in Uniondale Gardens, we recently found a post that had rotted clean through about eight inches below the soil line. The panel was still solid, but it sagged by more than two inches. We excavated, poured a proper footing, set a reinforced post, and re-hung the same panel. The owner kept their original gate, which is usually what people in Uniondale want – these older panels have a weight and finish you can’t easily replace.
When a post shifts, the hinges bind and the gate tears itself apart slowly. Realignment alone won’t fix the root cause. The correct fix is resetting the post deeper and bedding it in concrete so the freeze-thaw cycle stops moving it. That’s a repair we make a point of explaining clearly because a homeowner who understands the root cause won’t get talked into a full replacement they don’t need.
Rust and Corrosion Repair
Salt air is brutal on bare iron. Wrought gates within a few miles of the water develop rust at the base of the posts and along the lower rail. We cut out the bad sections, weld in new steel where the panel is still worth saving, and treat the repaired areas so they don’t rust out again in two seasons. If the panel is losing metal in multiple places, we’ll say so honestly – at that point replacement is often cheaper than chasing rust forever.
Metal Gate Repair in Uniondale
Metal gate repair in Uniondale covers everything from chain-link gates on residential lots to steel sliding gates on apartment properties. The most common jobs are hinge rebuilds at $150 – $300, post resets at $350 – $750, and weld repairs on cracked top rails or diagonal bracing at $120 – $280. Chain-link gates and steel frame gates share the same failure pattern here: the post moves, the hinges bind, and the latch or operator takes the damage.
Sliding Gate Repair
Sliding gates on Uniondale’s multi-family properties wear out differently than swing gates. The wheels or rollers flatten, the rail collects debris, and the drive gear on the operator strips when the gate no longer rolls freely. We replace roller assemblies, clean and true the rail, and correct the motor alignment so the gear doesn’t eat itself again. A common DIY fix in Uniondale is greasing a noisy rack and pinion – that quiets the sound for a few weeks and then the gear strips entirely, which turns a $200 mechanical fix into a $600 operator repair.
When a sliding gate binds, the operator works harder on every cycle. That’s why we look at the entire system: panel, rollers, rail, and motor. Fix one part alone and the next failure follows within months.
Gate Realignment After Winter
Uniondale’s freeze-thaw cycle shifts posts gradually. By spring, gates that closed square in October drag by an inch or more. The realignment itself is straightforward – adjust hinges, correct the latch alignment, possibly shim a post – but the underlying issue is usually the footing. If we realign a gate and the post is loose below ground, we tell the homeowner. Some want to wait another season. Most understand that resetting the post is the only permanent fix, and it saves the second service call they’d otherwise need next March.
Trusted Brands We Service in Uniondale
We repair operators and control boards from Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, Linear, and BFT. Uniondale has a lot of legacy equipment still in service – DoorKing and Elite swing operators from the early 2000s are common, and those boards are failing now from corrosion and age. We stock the replacement parts for these older operators and rebuild control boards where a new board is unavailable or overpriced. Most repairs are completed the same day because the truck is already carrying the right components for the brands installed across Uniondale.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Uniondale Homes
- Failed control boards on older operators: LiftMaster and FAAC units installed 15 to 20 years ago are reaching end of life. Salt air accelerates corrosion on the board contacts, and suddenly the gate won’t respond or won’t stop at the limits. We carry replacements and can often swap the board in under two hours.
- Hinge posts rotted at ground level: Original posts on 1940s-1960s Uniondale homes were set in soil or thin concrete. Water collects at the base, the post rusts through, and the gate drops. This appears in nearly every older neighborhood here and almost never on newer construction.
- Spring seasonal realignment: Gate posts shift through winter freeze-thaw near the Southern State Parkway corridor. Each spring, we realign dozens of Uniondale gates that closed fine in October but now drag on the driveway.
- Gear and rack wear on sliding gates: The apartment complexes and garden apartments around Uniondale use sliding gates on daily cycles. When the rack and pinion wears, the gate grinds and shudders. We replace the rack, rebuild the drive, and reset the operator so the new parts aren’t chewed up by the same misalignment.
Pricing for Gate Repair in Uniondale, NY
Most Uniondale gate repairs fall into predictable ranges. Hinge and latch work runs $145 – $285. Post resets with concrete run $350 – $750 depending on depth and whether we bring fresh concrete. Control board replacement for older LiftMaster, FAAC, or DoorKing operators runs $360 – $890 installed. Full operator replacement, which happens when a motor has failed and the board is also done, runs $800 – $1,400. Safety retrofits like photo-eyes and edge sensors add $250 – $500 when the existing system predates UL 325 requirements.
We quote the job before any work starts. The price you get on the phone is a firm estimate; the written price tied to the work order is the price you pay, even if the job takes longer than we predicted. Estimates are free. Call (516) 559-4870 and we’ll set a window, not a vague “sometime tomorrow.”
We Also Serve Cities Near Uniondale
Our crew works across central Nassau County, so if you’re in Hempstead, East Meadow, Merrick, or Freeport, the same written-price guarantee and 365-day warranty applies. For a full look at the Gate Repair in Uniondale coverage area, including which brands and equipment types we service nearby, give us a call at (516) 559-4870 and we’ll confirm your neighborhood.
Serving Uniondale, NY - Our Local Coverage Area
We’re based in the Uniondale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Uniondale
Because your hinge posts are set in footings that move with the freeze-thaw cycle. Original post-war posts across Uniondale were set shallow, and soil expansion lifts them a fraction of an inch every winter. By spring, the panel no longer lines up. The permanent fix is excavating and pouring a deeper concrete footing, not adjusting hinges again. Call (516) 559-4870 and we’ll tell you if your post is moving or if the panel is just worn.
Yes, in most cases. A 1990s operator can usually be fitted with photo-eyes, edge sensors, and a new control board for $600 – $1,000 total, assuming the motor itself still runs. If the motor arm or gearbox is also failing, replacing the operator is the better financial call. We’ll give you a written price for both options so you can decide with actual numbers.
The hinge post is failing or the hinge pins are worn. The panel itself rarely bends on its own; it drops because the post shifted or the pivot point wore out. On Uniondale’s older homes, this is almost always an original post that has rusted below ground. We reset the post, replace the hinges, and the panel usually hangs straight again without any metalwork.
Yes. Any newly installed or significantly modified automatic gate must meet current UL 325 safety requirements, which include photo-eyes or an equivalent entrapment sensor. Gates installed before the standard existed are commonly still in service around Uniondale without them, and we strongly recommend retrofitting. The cost runs $250 – $500 per gate, and we quote it in writing before the work starts.
Usually not. Grinding means the rack and pinion or the roller assembly is worn, and the motor is working harder to move a gate that no longer rolls smoothly. If we fix the mechanical drag now, the motor has years left. If the grinding continues, the gear strips and then the operator does need replacement. Call (516) 559-4870 and we’ll diagnose it on the phone before sending a truck.
Written by Lonnie Burke, Owner at Carver Gate Repair Hempstead, serving Uniondale and central Nassau County.