Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in Hempstead, NY
Electric gate repair in Hempstead typically costs between $225 and $600 for most motor, sensor, and hinge issues, with full operator replacement running $1,400 to $3,200 depending on the system. Most repairs are completed the same day a technician arrives, and Carver Gate Repair Hempstead gives you a written price before any work starts. Call (516) 559-4870 and a live person answers, any hour, any day. If you need a broader look at what gate work involves around here, our Gate Repair in Hempstead page covers the full range of services we handle.
We work exclusively on our Gate Repair services and motor systems. Not fences, not garage doors, not general contracting. That focus matters when a Viking swing operator stops responding or a Ghost Controls keypad loses signal. We train on nine motor brands, and we carry the parts that Hempstead homes actually use. Every repair comes with a written 365-day guarantee. If it fails inside that year, the second visit is free.
Key Takeaways
- Electric gate repair in Hempstead runs $225 – $600 for common motor and sensor issues.
- Replacing a full gate operator costs $1,400 – $3,200, depending on brand and gate type.
- Carver Gate Repair Hempstead provides a written price before work starts, never after.
- Every repair carries a written one-year guarantee, backed by a free second visit if it fails.
- Technicians are background-checked and uniformed, dispatched from Hempstead.
- Call (516) 559-4870, 24/7, and a live person picks up.
When You Need Electric Gate Repair
Most electric gate failures announce themselves before the gate stops moving completely. Ignoring the early signs costs more later. Here are the situations Hempstead homeowners call us about most:
- Gate opens halfway and stops. Usually a limit switch that has drifted out of position or a motor capacitor losing its charge. Common on DoorKing and Viking units after a few years of Nassau County temperature swings.
- Gate reverses on its own, or slams against the stop. The loop detector under the driveway may be misreading, or the close-force setting is too high. This is a safety issue, not a nuisance.
- Keypad, remote, or intercom won’t open the gate. Sometimes it’s the receiver board. Sometimes it’s a dead transformer. If the motor hums but nothing moves, the capacitor or gearbox is usually the culprit.
- Gate is crooked, sagging, or dragging on the track. Hinge wear and wheel fatigue from years of opening cycles. In Hempstead’s coastal air, corrosion accelerates hinge and bracket failure.
- Motor runs constantly or makes a grinding noise. A stripped gear inside the operator or a failing limit cam. Running a motor with a stripped gear turns a $250 repair into a full replacement.
- Gate shut during a power outage and won’t open. Many Hempstead gate systems lack a battery backup. We can add one, or wire a manual release so you’re never locked out of your own driveway.
If any of this sounds familiar, Gate Repair in Hempstead is our full service line, and electric gate motor work is a core part of it. Call (516) 559-4870 and describe the symptom. We’ll tell you what’s likely happening and what it costs to fix before we ever roll a truck.
Our Electric Gate Repair Process
We follow the same steps on every call, whether it’s a broken swing arm on a Ghost Controls system in Baldwin or a failed Elite slide operator near Hofstra that needs Gate Realignment. No exceptions. That consistency is what The Garrison Standard means in practice.
- You call, a live person answers. Always. Not a voicemail tree, not a call-back queue. A real person takes your address, your symptoms, and your gate’s brand if you know it. We schedule an arrival window that same day in most Hempstead cases.
- A background-checked, uniformed technician arrives. You’ll recognize who we sent. Technicians carry identification and arrive in marked vehicles. They inspect the gate, the operator, the sensors, and the power supply before touching anything.
- You get a written price before work starts. The number we quote is the number you pay. No discoveries that “change the scope” mid-repair. If we find additional damage, we show you what we found and quote it separately. You decide.
- We repair the gate on the spot. Most repairs happen in one visit. Our trucks carry limit switches, loop detectors, capacitors, remotes, and receivers for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
- We test the full cycle, multiple times. Open, close, reverse. Obstruction response. Keypad. Remote. Intercom, if applicable. If it doesn’t cycle cleanly under load, we keep working until it does.
- You get a written 365-day guarantee. The Done Right Promise covers the repair in writing for a full year. If the same issue comes back inside that window, we return free. No argument, no second invoice.
Electric Gate Repair Pricing in Hempstead
Here are the price ranges we quote most often in Hempstead for electric gate work. These are real numbers, not bait. Your specific repair depends on the brand, the gate’s weight, and how far the motor has to travel.
| Repair Type | Typical Cost |
|---|---|
| Limit switch adjustment or replacement | $150 – $250 |
| Capacitor replacement | $120 – $200 |
| Remote or keypad receiver board | $180 – $300 |
| Loop detector replacement | $225 – $375 |
| Hinge, wheel, or bracket repair | $200 – $450 |
| Gearbox or drive gear replacement | $350 – $600 |
| Full operator replacement (swing or slide) | $1,400 – $3,200 |
What moves the price up or down? Gate weight is the biggest factor. A light aluminum driveway gate puts less strain on a motor than a solid steel one. Brand matters too. DoorKing and Viking operators are common in Hempstead and parts are readily available. Elite and Ghost Controls units sometimes require board-level diagnostics that take longer. And location matters. Homes near Hempstead Turnpike deal with more vibration and road salt than homes in quiet residential blocks off Peninsula Boulevard, which affects hinge and sensor wear.
Every quote includes the labor, the parts, and the written guarantee. We don’t charge extra for the guarantee. We don’t charge travel fees inside our Hempstead service area. Estimates are free. Call (516) 559-4870 and ask for a price over the phone. We’ll give you the range before you commit to anything.
FAQs – Electric Gate Repair
How much does electric gate repair cost in Hempstead?
Most electric gate repairs in Hempstead run between $225 and $600 for common issues like limit switches, capacitors, and hinge failures. Full operator replacement costs $1,400 to $3,200. The exact number depends on your gate’s brand, weight, and how far the motor has to travel. Call (516) 559-4870 for a written quote, free.
Can you come out the same day?
Yes. Most Gate Repair Near Me in Hempstead, NY calls get same-day service when you reach us by early afternoon. Call (516) 559-4870 and a live person gives you a real arrival window, not a four-hour spread.
Is it cheaper to repair a gate motor or replace it?
Repairing is almost always cheaper in the short term, usually $225 to $600 versus $1,400 or more for a new operator. But if your motor is over 12 years old, the brand is discontinued, or the gearbox has stripped twice, replacement often costs less over three years. We’ll show you the numbers both ways and let you decide.
Do you work on my gate brand?
We repair Viking, Ghost Controls, DoorKing, and Elite systems, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. If your gate has a brand plate on it, we’ve almost certainly worked on that unit before. Call (516) 559-4870 and tell us what you have.
Call Carver Gate Repair Hempstead
If your electric gate is acting up, call (516) 559-4870 now. A live person answers, day or night. We’ll give you an honest read on what’s wrong, what it costs, and when a technician can be at your home in Hempstead. You get a written price before any work begins and a written one-year guarantee after it’s done. That’s the whole deal.
Written by Lonnie Burke, Owner at Carver Gate Repair Hempstead, serving Hempstead.