Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Jericho
A new gate installation in Jericho typically runs $3,800 – $9,600 for a single driveway gate, and $7,500 – $18,000 for a double gate with automation, depending on material, operator type, and whether we’re replacing rotted posts or starting fresh. Most Jericho jobs take two to three days from first measurement to final programming, and we carry the parts to complete them without a second trip back. If you’re on a tree-lined street off Jericho Turnpike or up near the Split Rock area, you already know how a dead gate shuts down the whole property. Call (516) 559-4870 and we’ll bring a written price before any work starts.
We know Jericho’s older estate gates better than a general contractor ever will. The homes here were built for space and privacy, and their gates were often installed decades ago with motors that have long since outlived their usefulness. Whether you need a full Gate Installation on a new build or a complete retrofit on a 1970s swing gate, our crew handles the measurement, fabrication, concrete work, operator mounting, and safety sensor wiring as one job, not five separate invoices.
Why Carver Gate Repair Hempstead Is Jericho’s Preferred Gate Installation Company
Jericho homeowners call us because we write down a price before we touch the property and we honor that number. No recalculations at the door. No “discovered issues” that double the bill. The Garrison Standard is exactly that: a written scope, a background-checked technician in a uniform, and a 365-Day Done Right Promise on every installation. If the gate doesn’t operate correctly within a year, we come back and fix it at no charge. Not a pro-rated credit. Not a service fee. We show up and make it right.
Lonnie Burke runs our operation the way a homeowner would want it run. Every Jericho job gets a technician who has been background-checked, wears the company uniform, and can explain exactly what he’s doing and why. You’ll know the price of the operator, the price of the steel or aluminum, and the labor, all itemized. That’s the discipline behind the work.
Our service area includes the Hamlet of Jericho, East Birchwood, and the newer subdivisions south of the LIE. Response for an estimate in Jericho is typically same-week, and we coordinate installations around your schedule, not ours. Dispatch and scheduling are coordinated from our New York City office, but the crews that serve Jericho work these streets every week. Local knowledge matters when you’re grading a 14-foot gate on a 40-degree slope or matching a new panel to an existing wrought iron fence line.
Styles & brands we work with
Electric Gate Installation in Jericho
Electric Gate Installation in Jericho usually means replacing an old swing or slide operator on a home built between the 1960s and the 1990s, and the job costs $2,800 – $7,200 for the operator and controls when the existing gate and posts are sound. When we’re fabricating a new gate and installing the operator, expect $4,500 – $12,000. The real variable in Jericho is what’s behind the gate: old wiring that was never rated for outdoor load, rotted post footings, and operators that don’t meet current UL 325 entrapment protection standards.
Retrofitting Older Estate Gates to Modern Safety Code
Many original Jericho estate gates were built with slide-gate motors that predate UL 325 entrapment protection requirements. That specific code gap means a new operator install must include retrofitted safety photocells or edge sensors, otherwise the gate simply isn’t compliant. We include that in every quote. It’s not an add-on. It’s the standard.
Battery Backup for Nor’easter Season
Power outages after a winter storm are a fact of life in Jericho, and an estate gate without battery backup becomes a 600-pound obstruction. We size a battery module to the operator based on gate weight and cycle frequency, so you can open and close through a full outage. We also mount a manual release key in a locked weatherproof box. No more searching through drawers for the key that was lost in 1998.
Driveway Gate Installation in Jericho
Driveway Gate Installation in Jericho costs $5,200 – $13,800 for a custom gate and operator on a typical 1 – 2 acre lot, with long runs and double gates pushing toward the upper end. The gates on these properties are heavier than production models, often 12 to 16 feet wide and built from steel or aluminum with solid infill panels. A gate that heavy needs a properly sized operator, and the concrete pad it sits on has to be poured to a depth that survives freeze-thaw cycles, not just a floating slab.
Custom Fabricated Gates for Setback Driveways
Homes in the Hamlet of Jericho and along Route 106 sit far back from the road, and the driveway gate is the first thing anyone sees. We work with a local fabricator on Long Island to match new gates to existing fence lines, including aluminum that’s powder-coated to match the house trim. For double driveway gates, we use a master-slave operator setup so both leaves open and close in sequence, and we set the limit switches to prevent sag correction failures.
Replacing Rotted Posts and Hinges
The humid summers and salty air from nearby Long Island Sound corrode steel hinge posts faster than most homeowners expect. We regularly find posts that look fine above grade but are eaten through at the concrete line. On any driveway gate installation in Jericho, we inspect the post footing before we hang anything. If the footing has shifted, we cut it out, pour a new one with rebar, and set the post in place with epoxy anchors.
Trusted Brands We Service in Jericho
Our technicians are trained on nine gate-motor brands, and for Jericho homes we most often install and service DoorKing, LiftMaster, FAAC, and Elite operators. If you have an existing Ghost Controls or Mighty Mule system, we can rebuild it or swap it for a heavier-duty operator without rewiring the entire run. We carry common parts in our trucks for these brands, so a repair or replacement in Jericho doesn’t wait on a backordered board from a distributor. That speed matters when you’re trapped outside your own driveway.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Jericho Homes
- Dead slide-gate motors after winter storms. Original 1960s – 1980s operators have no battery backup, and when the power drops in a nor’easter the gate stays wherever it stopped. Manual release keys were often lost years ago, so homeowners can’t even push the gate open by hand.
- Corroded hinge posts and track hardware. Freeze-thaw cycles and salt air from the Sound eat through steel posts at grade level. We replace the footing, not just the hinge, because a new hinge on a shifted post fails again within a season.
- Rotted wood gate panels loading the operator unevenly. Delaminated wood panels put off-balance weight on the operator, which burns out motors prematurely. When we install a new gate, we match the panel weight to the operator’s rated capacity, not just the gate’s visible size.
- Non-compliant entrapment protection on legacy estate gates. Older slide-gate systems lack the photocells and edge sensors now required under UL 325. A new installation has to address this, not pretend it’s optional.
Pricing for Gate Installation in Jericho, NY
A basic single driveway gate in Jericho with a new operator starts around $3,800. A custom fabricated double gate with a heavier operator, battery backup, and safety edges runs $8,500 – $16,000. Pedestrian gates are $1,800 – $4,200. The labor rate for installation work in Jericho is typically $110 – $150 per hour, and most jobs are quoted as a flat price once we see the property. What pushes cost up here specifically is the age of the existing posts, the length of the electrical run from the house to the gate, and whether we’re matching existing fence material. We quote the full scope in writing before we start, and the number does not move unless you change the scope. Call (516) 559-4870 for a free estimate.
We Also Serve Cities Near Jericho
Beyond Jericho, our crews cover Hicksville, Westbury, Syosset, and Bethpage. Many of those neighborhoods share the same housing stock and gate types we see in Jericho, which is why a technician can arrive with the right parts on the first trip. If you’re just outside Jericho, the same written-price standard applies.
Serving Jericho, NY - Our Local Coverage Area
We’re based in the Jericho area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Jericho
Yes. If your gate was built before the mid-1990s, the original operator likely does not meet current UL 325 entrapment protection requirements. Any new installation must include retrofitted safety photocells or edge sensors, which detect an obstruction and reverse the gate. We include this in every Jericho quote, and we’ll explain what each sensor does before we install it. Call (516) 559-4870 and we’ll inspect your existing system for compliance.
Yes. We install operators with battery backup modules sized to the gate’s weight and daily cycle count, so the gate opens and closes through a multi-day outage. We also supply a manual release key in a weatherproof lockbox mounted to the post. After the nor’easter passes, the battery recharges on its own and the system returns to normal operation. It’s standard equipment on any new installation we do in Jericho.
For long, heavy gates, an articulated arm swing operator or a rack and pinion slide operator is the right call, matched to the gate’s actual weight and cycle rating. We measure the gate, calculate the duty cycle, and select an operator from a brand like FAAC, DoorKing, or LiftMaster that won’t strain. Undersized operators are the most common cause of premature failure we see on Jericho estate gates. Call us for a free measured quote at (516) 559-4870.
We start with the post, not the panel. Humid summers and salt air corrode steel posts at the concrete line, and that’s what lets a gate sag regardless of hinge condition. We pour a new reinforced footing if the post has shifted, then install a rack and pinion drive or a properly rated hinge system that distributes the load. On wood gates we also check for delaminated panels before hanging them on a new operator. That’s how we keep the gate moving silently through the season.
We plan the work around what’s rootbound and established. For tree-lined driveways, we run conduit along the driveway edge rather than trenching through roots, and we mount operators on concrete pads that stay clear of drip lines. If a hedge has grown over the gate track, we’ll discuss trimming only what’s needed for the gate to travel safely. Our crews clean the site before we leave, including metal filings and old hardware removal.
Written by Lonnie Burke, Owner at Carver Gate Repair Hempstead, serving Jericho under the Garrison Standard.