Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Hicksville
Gate installation in Hicksville usually runs between $2,400 and $7,800 for a standard single or double driveway gate, depending on the material, motor, and how much site prep the job needs. We show up with a written price before any work starts, and the number does not move at the door. If you own a mid-century split-level or Cape Cod off Jerusalem Avenue, Newbridge Road, or around the Hicksville LIRR station, you already know these lots were not laid out for wide, modern gates. That is exactly the kind of site we handle most. Call (516) 559-4870 for a free estimate.
Why Carver Gate Repair Hempstead Is Hicksville’s Preferred Gate Installation Company
Hicksville homeowners tend to be done with technicians who no-show or walk in with a number that grows once the post hole is dug. Our Gate Repair - Hicksville team runs on The Garrison Standard, which has been in place since 2008. Every job gets a written price before we touch the gate. Every tech who arrives on a Hicksville property is background-checked and in uniform, so you know who is walking up the driveway. And every installation is backed by the 365-Day Done Right Promise: if something is not right, we come back and make it right. No charge, no argument.
We answer the phone with a live person around the clock, every day of the year, including weekends and holidays. When a gate seizes mid-swing on a Sunday morning off South Oyster Bay Road, you are not leaving a voicemail and hoping for Monday. Lonnie Burke leads our Hempstead operation, and the crews who serve Hicksville work to one standard on every job, whether it is a motor replacement or a full gate build.
Styles & brands we work with
Driveway Gate Installation in Hicksville
Driveway Gate Installation on Hicksville’s narrow mid-century lots usually means a single-swing aluminum or steel gate, sized for a nine- to twelve-foot opening and set on reinforced posts. The first thing we check is the property line and any shared right of way, because many Hicksville driveways sit close enough to the neighbor that a swing gate would cross over their side when fully open. Where that is the case, we recommend a slide gate instead, and we will show you the difference on site before you commit to anything. A typical single-swing Driveway Gate Installation in Hicksville runs $2,400 to $4,600, installed, depending on material and whether we are adding an operator.
Single-Swing Gates for Tight Front Yards
The most common installation we do in Hicksville is a single-leaf swing gate on a narrow driveway off streets like Woodbury Road or Charlotte Avenue. These properties usually cannot fit a double gate without giving up parking space. We set hinge posts in concrete footings poured below the frost line, because the sandy loam soil here shifts after February freezes and thaws. A properly footed post is what keeps the gate from sagging into the latch within two winters.
Double Gates for Rear-Yard Access
Hicksville homes with rear-yard access often need a double gate wide enough for trash bins, a riding mower, or an occasional vehicle. These gates take more hardware and more precise alignment. The drop rods and center latch have to be set so the gate stays level even when only one leaf is opened. We quote the whole job up front, including the concrete work, hinges, latch, and operator if you want one, so the price you approve is the price you pay.
Sliding Gate Installation in Hicksville
Sliding Gate Installation in Hicksville is the right call when a swing gate physically will not fit, which happens constantly on these narrow lots. A slide gate rides on rollers along a track or cantilevers off a carriage, so it never swings into the neighbor’s easement or blocks your own driveway while opening. It is also the better choice where a shared driveway serves two homes. On a tight split-level off Jerusalem Avenue, our techs installed a Viking slide gate with rack and pinion because a swing gate would have crossed into the neighbor’s easement. We set the hinge post in a 36-inch footing below the frost line, added a keypad entry and safety photocell, and kept the trash bins rolling through without dropping the gate off its rollers.
Tracked Slide Gates on Short Setbacks
Where the driveway has enough straight-run room, a tracked slide gate is usually the least expensive slide option. The track carries the gate’s weight, so the post takes less load than a cantilever design. On Long Island’s sandy loam, we still pour a deep footing and often add a steel post sleeve to resist the seasonal shift that pulls shallower posts out of line. Expect a tracked Sliding Gate Installation in Hicksville to run $3,200 to $6,100 installed, before an opener.
Cantilever Slide Gates for Uneven Grade
Some Hicksville driveways slope or have a swale near the street, which makes a bottom track a bad idea. A cantilever slide gate rides above the ground on carriers, so snow, salt, and debris never jam the rollers. These gates cost more because they need a longer, heavier frame and a stronger post system, typically $4,500 to $7,800 installed in Hicksville. We will tell you straight if your site does not need a cantilever, because charging you for one would be wrong.
Trusted Brands We Service in Hicksville
Our technicians work on gate motors and hardware from Viking, Ghost Controls, DoorKing, and Elite, among others, and we stock common parts locally for faster turnaround on Hicksville jobs. If your existing system is a Viking or DoorKing opener and you want the new gate tied into it, we can save you the cost of replacing a working motor. When a motor does need replacing, we will show you a written price for the new operator, the wiring, and the safety edges before any part is ordered. No one should approve a gate motor replacement blind.
Common Gate Installation Problems We See in Hicksville Homes
- Swing gate hinge post shifts in sandy loam after February freeze-thaw. This is the most common failure, and it is why we pour post footings below the frost line on every Hicksville install, not at whatever depth saves an hour of digging. A shifted post causes sag that no panel adjustment can fix.
- Shared driveway gates with loop detectors fail to open for delivery trucks. We regularly see loop detectors set too shallow or tuned wrong, so a UPS truck sits in the street while the gate ignores it. We size and tune loop detectors for the actual vehicle traffic on the shared drive.
- Salt-air corrosion on original 1960s galvanized hinges seizes the gate mid-swing. The coastal humidity and winter road salt around Hicksville eat through old galvanized hardware. We replace seized hinges with stainless or powder-coated hardware and set the gate so it does not bind at the top hinge.
- Narrow openings leave no room for a swing gate without blocking trash bin rollout. On lots where the gate would hit the bins or swing into the neighbor’s easement, we install a slide gate instead. It solves the geometry without sacrificing the access you already have.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Hicksville, NY
Expect a single-swing driveway gate in Hicksville to cost between $2,400 and $4,600 installed, with a slide gate running $3,200 to $7,800 depending on whether it is tracked or cantilever. Motorized openers add $900 to $2,300 depending on brand and whether we need to run new power to the gate. The variables are material, gate width, soil condition at the post holes, and whether your existing posts can be reused. We give you a written price after we look at the site, and that price is good before any work starts. Call (516) 559-4870 and we will schedule a free measure.
Here is what a typical Hicksville gate budget looks like:
- Single-swing aluminum driveway gate, installed: $2,400 – $4,600
- Tracked slide gate, installed without opener: $3,200 – $6,100
- Cantilever slide gate, installed without opener: $4,500 – $7,800
- Gate opener with safety edges and keypad: $900 – $2,300
- New post footings with concrete below frost line: $400 – $900 per post
We Also Serve Cities Near Hicksville
Our crews regularly handle Gate Installation work in Hicksville and the surrounding communities. If you are in Jericho, Bethpage, Levittown, or Westbury, the same Garrison Standard applies: written pricing, background-checked technicians, and a full-year written guarantee on every job. Call the same number and a live person picks up, day or night.
Serving Hicksville, NY - Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Hicksville
Because a swing gate needs room to arc across the driveway, and many Hicksville lots do not have it. A slide gate travels in a straight line along the fence line, so it never crosses a property line, never blocks a neighbor’s easement, and never knocks over trash bins left at the curb. On a shared driveway, a slide gate is often the only automatic option that works at all.
We pour post footings at minimum 36 inches deep, below the frost line for Nassau County. The sandy loam soil around Hicksville drains fast but shifts as it freezes and thaws, and a post set at 24 inches will move within two winters. It costs a little more to dig deeper, and it is the difference between a gate that stays square and one that sags by spring. Call (516) 559-4870 for a free measure and written quote.
Yes, usually, by using a slide gate operator with a loop detector sized for the largest regular vehicle, plus a keypad or remote setup for each household. We set the loop to detect delivery trucks and visitor cars, not just the homeowners’ vehicles. Each home gets its own access code or remote, and we set the auto-close delay so the gate never closes on someone’s second car.
The post was not set deep enough, and freeze-thaw in the sandy loam shifted it out of plumb. Once the post leans, the gate sags, the latch misses, and the hinges bind until the gate will not move. We see it constantly on original 1960s and 1970s installations around Hicksville, and the fix is not panel adjustment. The fix is resetting the post in a deeper footing and re-hanging the gate.
Yes. Any automatic gate in Hicksville needs entrapment protection, which means safety edges, photocells, or both, depending on the gate type and how it opens. The system has to stop and reverse if it contacts a person, a car, or a bin while closing. We include the required entrapment protection in every automatic gate quote, and we test it before we leave the site. Call (516) 559-4870 and we will walk you through what your gate needs.
Contact Carver Gate Repair Hempstead for Gate Installation in Hicksville
If you need a new gate on a Hicksville property, call (516) 559-4870 for a free estimate. We serve Hicksville with written prices, background-checked technicians, and a one-year written guarantee on every job. Whether you are dealing with a seized hinge off Newbridge Road or planning a full Gate Installation on a tight lot near the LIRR station, we will show up, measure the site, and give you a number before any work starts. That is the whole point of The Garrison Standard.
Written by Lonnie Burke, Owner at Carver Gate Repair Hempstead, serving Hicksville since 2008.