Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Hempstead, NY
A sagging gate almost always comes down to two things: a hinge that has pulled loose or a post that no longer sits plumb. Hinge and post repair in Hempstead typically costs between $240 and $650 depending on whether we are resetting hardware, sleeving a rotted post, or pouring a new footing. Carver Gate Repair Hempstead handles this work the same way on every job: a written price before we start, a full-year written guarantee, and a technician who shows up on time. If your gate drags, binds, or no longer latches, we also check whether you need lock repair. Call (516) 559-4870 and we will tell you exactly what we see and what it costs to fix.
This page covers the hinge and post repair work we do as part of our broader Gate Repair in Hempstead service. You can also read more about the full scope on our Gate Repair page, which covers motors, operators, and full gate systems across nine brands. Hinge and post work is the structural half of gate repair. Without it, the motor is just pushing against a frame that is slowly twisting out of alignment.
When You Need Hinge & Post Repair
Most hinge and post failures show up gradually, then all at once. A gate that scrapes the driveway in July may not close at all by December when the ground freezes and shifts. Here are the conditions we see most often around Hempstead, from Uniondale to West Hempstead and up toward Garden City:
- The gate scrapes or drags on one side. This almost always means the hinge side has dropped. The post has shifted or the hinge leaf has loosened from the post face.
- The gate will not latch. When a post leans even a few degrees, the latch bar misses the strike plate by a wider margin every week. Forcing it closed bends the hardware.
- The top hinge has pulled out of the post. Common on older wood posts and on metal posts set in shallow concrete. You will see the screws backing out or tear-out around the bolt heads.
- The post wobbles when you push on it. Rot below grade, a cracked footing, or undersized concrete. In Hempstead’s clay-heavy soil, water sits against post bases longer than it does in sandier ground, which shortens the life of untreated posts.
- The gate closes on its own or swings open. If the hinges were never set plumb in both planes, gravity does the work. This wears the hinges and eventually the motor, if one is installed.
- You hear popping or creaking from the hinge side during the travel. That sound is metal on metal or a hinge leaf flexing against a post that is no longer giving it a solid seat.
If any of these match what you are seeing, do not let it go until the gate stops moving. A gate that falls off its hinges is a serious hazard, and it weighs more than most people expect. Call (516) 559-4870 and we will get someone out to look at it, often the same day.
Our Hinge & Post Repair Process
We follow the same sequence on every hinge and post job. No surprises, no work that was not on the written price. Here is how it goes:
- Inspection and measurement. We check the existing posts for plumb in both directions, the hinges for wear and pull-out, and the gate frame itself for racking. We also check the ground around the posts for soft spots or standing water that may be causing movement.
- Written price before any work. After the inspection, you receive a written price that lists exactly what we are doing: resetting hinges, replacing a post, pouring a new footing, or rebuilding a gate section. That number does not change at the door.
- The repair work. For hinge replacement or reset, we remove the old hardware, repair or fill the seat, and mount the new hinges on both planes with a level. For post work, we excavate the old footing, set the new or repaired post, and let the concrete cure properly before re-hanging the gate.
- Re-hang and alignment check. The gate goes back on and we run it through a full open-close cycle by hand. We check clearance at the latch side, the hinge side, and along the bottom rail.
- Cleanup and walkthrough. We leave the site the way we found it, minus the problem. We walk you through what we did, show you the latch and hinge operation, and give you the written guarantee on the spot.
This process is the Garrison Standard we operate under at every Carver Gate Repair location. It has been in place since 2008, and it means the same thing in Hempstead as it does anywhere else: written prices, clean sites, and work that stays fixed.
Hinge & Post Repair Pricing in Hempstead
Hinge and post repair in Hempstead runs from about $240 on the low end to $650 or more when a new post and footing are required. Here is a breakdown of the most common jobs we quote:
| Repair Type | Typical Range | What It Includes |
|---|---|---|
| Hinge replacement (pair) | $180 – $320 | New hinges sized to the gate, removal of old hardware, resetting both leaves, alignment check. |
| Hinge reset / re-seating | $140 – $240 | Repair of pull-out damage, re-setting existing hinges in the correct plane, latching adjustment. |
| Post stabilization (existing post) | $220 – $400 | Excavation around the base, concrete repair or replacement, re-plumbing the post, re-hanging the gate. |
| Full post replacement | $400 – $650+ | Removal of the old post, new post set in a new concrete footing, hinge hardware, re-hang, and cleanup. |
What drives the final number is the condition of the post below grade, the type and size of the gate, and whether the hinges can be saved. A solid steel post that just needs a new hinge set is a fast job. A rotted wood post in wet clay soil with an undersized footing is a full replacement, and it is not worth cutting corners on. In parts of Hempstead where older homes have original gate posts from the 1960s and 1970s, the below-grade rot is usually worse than the above-ground condition suggests.
Every quote is free. You get a written price before anything is done, and that price is the price. Call (516) 559-4870 and a live person will pick up, day or night.
Hinge Hardware and Gate Brands We Work With
We replace and repair hinges on gates from a range of manufacturers, including Viking, Ghost Controls, DoorKing, and Elite. We also handle automatic gate repair when the operator is involved. Most hinge failures are independent of the operator brand, but the gate weight, panel size, and the way the operator mounts all affect hinge load. A heavy DoorKing swing gate puts different stress on the top hinge than a lighter Ghost Controls residential gate. When we quote the repair, we check the full system, not just the broken hinge. That is how we catch a failing post before it takes out a $900 motor.
Why Hempstead Homeowners Call Carver Gate Repair
The gate repair business has a lot of people who will quote one number on the phone and show up with a different one. That is not how we work, and we put it in writing on every single job.
- Written price before any work starts. Not a verbal estimate. A written price. The number does not move at the door.
- 365-Day Done Right Promise. Every hinge and post repair carries a written guarantee for a full year from the date of service. If the repair fails inside that window, we come back and fix it at no charge.
- Background-checked, uniformed technicians. You know who is coming before they arrive, and you can verify them when they do.
- Live person on the phone, 24/7. Call at 2 p.m. or 2 a.m. on a holiday. A person answers. No voicemail tree, no callback queue.
- Garrison Standard since 2008. Carver Gate Repair is part of the Garrison Partners family. Every location, including Hempstead, operates under the same written standard. The promise does not change based on the market.
Lonnie Burke runs the Hempstead operation, and the crew answers to that standard on every gate, every post, every hinge.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Hempstead?
Hinge and post repair in Hempstead typically costs between $240 and $650, with simple hinge replacement at the low end and full post replacement with a new concrete footing at the high end. The final number depends on the condition of the post below grade, the gate weight, and whether existing hinges can be re-used. Call (516) 559-4870 for a free written estimate with exact numbers for your gate.
Can you fix a leaning gate post without replacing it?
In many cases, yes. We can stabilize a leaning post by excavating around the base, repairing or replacing the concrete collar, and re-plumbing the post before re-hanging the gate. If the post itself is rotted or structurally compromised, replacement is the honest repair and we will tell you that directly. Call (516) 559-4870 and we will assess the post before recommending anything.
How long does hinge and post repair take?
Most hinge replacements and re-seats are completed in two to three hours on site. Post replacement with a new concrete footing typically requires a return visit to re-hang the gate after the concrete has cured, which is usually 24 to 48 hours depending on weather. We will give you the timeline in writing with your price.
Do you guarantee hinge and post repair work?
Yes. Every hinge and post repair we perform in Hempstead carries our 365-Day Done Right Promise, a written guarantee good for one full year from the date of service. If the repair fails inside that window, we return and fix it at no charge. That guarantee is on paper on every job, not a verbal promise.
Is it cheaper to repair a gate hinge or replace the whole gate?
Repairing hinges and posts is almost always much cheaper than replacing the gate. Hinge and post work runs in the mid-hundreds; a full gate replacement in Hempstead commonly starts around $1,200 and goes up from there depending on material and size. Unless the gate itself is structurally compromised or needs weld & rust repair, hinge and post repair is the right first move. Call (516) 559-4870 for a straight answer on your gate.
Contact Carver Gate Repair Hempstead
If your gate is sagging, scraping, or swinging loose on its hinges, do not wait for it to fall. Call (516) 559-4870 now for a free estimate and a written price. A live person answers. A uniformed technician shows up. And the repair is guaranteed in writing for a full year. That is the Garrison Standard, and it applies to every hinge and post we touch in Hempstead.
Written by Lonnie Burke, Owner at Carver Gate Repair Hempstead, serving Hempstead.