Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Port Washington, NY
Carver Gate Repair handles gate work across Port Washington, NY, from manual driveway gates that have sagged for years to automatic systems that stopped responding after the last coastal storm. Port Washington is a peninsula town with salt air, steep driveways, and housing stock that ranges from pre-war iron gates to newer custom automatic systems. That mix means most jobs here are not simple swaps. They are repairs and installations planned around tight setbacks, corrosion, and operators that take a beating from the weather. If you need a gate fixed, installed, or its motor rebuilt, call (516) 559-4870 and you will reach a live person who can schedule a technician.
Why Port Washington Homes Are Different
Port Washington sits on a peninsula, and the geography shapes every gate job we take here. Many properties, especially in Manorhaven and along Soundview Drive, have narrow driveways cut into slopes where a gate has to swing or slide into a tight footprint. We regularly see original iron gates on pre-1940 colonials and tudors where the hinges have corroded from decades of salt air, and the posts have shifted enough to throw the latch off by half an inch. That is not a cosmetic issue; it puts strain on the operator until something fails.
The housing stock runs from those older homes with heavy custom gates to 1960s and 1980s ranches and split-levels where aluminum sliding gates were standard. Newer construction often includes custom automatic driveway gates, many of them sized for wider lots than the driveway actually allows. On the Sound side, winter storms knock out power and we get calls about operators that will not respond because the backup battery drained. In the summer, humidity works on electrical connections. The common thread is that Port Washington gates need components rated for coastal conditions, and they need to be installed so water and salt do not get a second chance at them.
Styles & brands we work with
Our Main Port Washington Services
Most Port Washington homeowners call us for one of two reasons: a gate that has stopped moving, or a gate that needs to be replaced with something that fits the property and the climate. Each service has its own Port Washington page with pricing and specifics.
Gate Repair in Port Washington
Gate repair here usually starts with a gate that drags, binds, or will not latch. On older Port Washington homes, we often find hinge pins worn thin by salt air, or posts that shifted during a freeze-thaw cycle. We square the frame, replace the worn hardware, and realign the gate so it moves without fighting the operator. See Gate Repair in Port Washington for what a typical repair includes and what it costs.
Gate Installation in Port Washington
Installation in Port Washington means working around narrow setbacks, sloped driveways, and sometimes HOA rules about gate height and finish. We measure the opening, check the grade, and spec a gate that will swing or slide without hitting a wall or a parked car. Coastal hardware matters here more than inland. See Gate Installation in Port Washington for our process and written pricing.
Gate Motor Repair in Port Washington
Motor failures on the peninsula are often corrosion or storm related. We open the operator, test the limit switch and the board, and replace what failed rather than selling a whole new system when the repair is straightforward. We carry parts for the major brands so most Port Washington jobs are done in one visit. See Gate Motor Repair in Port Washington for brand coverage and cost ranges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Port Washington
Our technicians work on Viking, Ghost Controls, DoorKing, and Elite systems, among others. Parts for these brands are stocked in our local service vehicles, which keeps most Port Washington repairs to a single trip. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Port Washington, NY
| Service | Typical range in Port Washington |
|---|---|
| Gate hinge or bracket replacement | $180 – $320 |
| Gate wheel or roller replacement | $160 – $280 |
| Gate post realignment (minor shift) | $250 – $450 |
| Gate opener limit switch replacement | $200 – $340 |
| Gate opener circuit board replacement | $260 – $520 |
| Loop detector replacement | $240 – $420 |
| Safety edge or photo eye replacement | $180 – $320 |
| Gate opener arm replacement (swing operator) | $350 – $650 |
| Gate operator motor replacement | $500 – $950 |
| New gate installation (standard aluminum or steel) | $1,800 – $4,500 |
| Custom gate installation (heavier or oversized) | $4,500 – $9,000 |
In Port Washington, two things push the price up: the salt air means we replace more corroded hardware than you would inland, and the tight site conditions on many peninsula properties mean we are modifying hinges or tracks rather than bolting on a standard part. Every job gets a written price before work starts, and that number does not move at the door.
Neighborhoods We Serve in Port Washington
We cover the full Port Washington peninsula, from the waterfront streets to the inland sections. Our normal response time for non-emergency gate work in Port Washington is same day or next day, depending on the call volume and where the technician is at that moment.
- Manorhaven
- Beacon Hill
- Baxter Estates
- Port Washington North
- Sands Point
Service Area – Cities Near Port Washington
Carver Gate Repair also covers nearby communities across Nassau County. If your home is in Westbury, NY, Jericho, NY, Hempstead, NY, or Syosset, NY, the same written-price standard and background-checked technicians apply. Dispatch is coordinated from our New York City office, with crews serving Port Washington locally.
Serving Port Washington, NY - Our Local Coverage Area
We’re based in the Port Washington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Port Washington
For a gate that will not open or close, we typically get a technician to a Port Washington home the same day. Non-emergency repair and installation work is usually scheduled within one to two days. Call (516) 559-4870 and a live person will give you an honest arrival window.
Some Port Washington HOAs, particularly in planned communities, do require approval before a gate is replaced, especially if the style or height changes. We recommend checking with your HOA or management company before scheduling installation. We can provide a spec sheet for your application.
Salt air corrodes electrical connections, and winter storms knock out power, which drains backup batteries and sometimes damages boards when power returns unevenly. We install and recommend components rated for coastal exposure, and we test the full system after every motor repair.
If your Port Washington gate is not working the way it should, call Carver Gate Repair at (516) 559-4870 for a written estimate. A live person answers around the clock, and every repair is backed by our written 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Port Washington Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.