Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Merrick, NY
Gate repair in North Merrick, NY typically runs $180 to $650 for most hardware fixes and $450 to $1,100 for motor work, with full installations starting around $2,800. The houses here, mostly mid-century ranches and capes on modest lots, put real stress on gate hardware. Salt air from the South Shore works on iron and steel year-round, and freeze-thaw cycles heave posts that were set in concrete fifty or sixty years ago. We’re Carver Gate Repair, and we work to one standard on every North Merrick job: a written price before we touch anything, a background-checked technician at your gate, and a written guarantee good for a full year. Call (516) 559-4870 when a gate stops doing its job.
Why North Merrick Homes Are Different
North Merrick is unincorporated Nassau County, and that shapes the work more than most homeowners realize. There’s no village building department here. Gate installations, post replacements, and sometimes even motor retrofits fall under Nassau County code enforcement, not a local inspector’s office. That means we file for the right permits the first time and don’t leave a homeowner holding an open violation.
The housing stock is the other factor. Most homes went up in the 1950s and 60s, and the original gates that came with them, wrought iron or chain link, are still standing in a lot of driveways. The posts under those gates are often set in concrete that has cracked or shifted over decades. When a post leans, the hinges bind, the latch stops aligning, and the motor starts fighting dead weight. We see it on nearly every older North Merrick street, from the blocks north of Camp Avenue down toward the Southern State corridor. Coastal humidity means the hardware rusts faster than it does ten miles inland. We account for that when we choose replacement hinges, rollers, and fasteners.
Styles & brands we work with
Our Main North Merrick Services
North Merrick homeowners call us most often for two situations: a gate that won’t swing or slide correctly, and a motor that opens the gate halfway or trips a breaker. Each service has its own dedicated North Merrick page below.
Gate Repair in North Merrick
Most North Merrick gate repairs come down to corroded hinges, a shifted post, or a latch that no longer catches. On older wrought iron gates, the salt air eats at hinge pins and weld points until the gate sags and drags on the driveway. We cut out and replace rotten hardware, re-set or re-shim leaning posts where possible, and bring the gate back to plumb and level. Full details, including local pricing, are on our Gate Repair in North Merrick page.
Gate Installation in North Merrick
New gate installations in North Merrick start with the post question. We core out and pour new footings with proper depth for coastal freeze-thaw cycles, then hang a gate sized to the driveway and the opener you plan to run. Whether it’s a driveway swing gate or a pedestrian gate off the walkway, the job is quoted in writing before any concrete is mixed. See Gate Installation in North Merrick for what a full install includes.
Gate Motor Repair in North Merrick
Homes near the Southern State Parkway often run original 60-amp or 100-amp panels, and a heavy automatic gate opener can pull enough surge current to trip breakers or burn out a control board. We diagnose the motor, limit switches, loop detectors, and the power feed, then tell you exactly what failed and what it costs to fix before we start. Detailed motor diagnostics and repair costs are on the Gate Motor Repair in North Merrick page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Merrick
Our North Merrick technicians carry parts and control boards for the systems most common on Long Island driveways, including DoorKing, Elite, Ghost Controls, and Mighty Mule. When we identify a failed board or a seized operator, we can usually source the replacement same-day. See our brands for the full list of supported equipment.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Merrick, NY
| Service | Typical range in North Merrick |
|---|---|
| Gate hinge or latch repair | $180 – $350 |
| Sagging gate realignment | $250 – $450 |
| Wrought iron gate weld repair | $220 – $500 |
| Gate post re-setting or shimming | $350 – $650 |
| Gate opener limit switch replacement | $200 – $400 |
| Loop detector replacement | $300 – $550 |
| Gate motor control board replacement | $400 – $750 |
| Complete gate motor replacement | $650 – $1,100 |
| New gate installation (single swing) | $2,800 – $7,500 |
| New gate installation (double swing) | $6,500 – $14,000 |
Salt corrosion and post movement push North Merrick prices toward the upper end when hardware has to be cut out rather than adjusted, and when footings need new concrete. Whatever the number, it is written down and agreed to before any work starts. The price does not move at the door.
Neighborhoods We Serve in North Merrick
We cover all of North Merrick, from the tree-lined blocks near Fayette Avenue up through the areas alongside the Southern State and east to the Bellmore border.
- North Merrick center, near Camp Avenue and Jerusalem Avenue
- The streets off Old Mill Road
- Neighborhoods north of the Southern State Parkway
- Areas bordering Merrick Road to the south
- The residential blocks near Fayette Elementary
We schedule on a real arrival window, not an all-day wait. Calls are answered by a person, around the clock.
Service Area – Cities Near North Merrick
Carver Gate Repair covers North Merrick and the surrounding Nassau County towns where the same coastal conditions and mid-century housing stock apply. We also run regular routes through Hempstead, NY, Jamaica, NY, Levittown, NY, and Baldwin, NY. If your street touches any of these borders, we’ll get a technician out on the same schedule as a North Merrick call.
Serving North Merrick, NY - Our Local Coverage Area
We’re based in the North Merrick area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Merrick
Most North Merrick calls get a same-day or next-day arrival window, because dispatch is coordinated from our New York City office and crews run Nassau County routes daily. Call (516) 559-4870 and a person, not a voicemail box, will confirm your window.
North Merrick is unincorporated, so gate and post work falls under Nassau County code enforcement rather than a village building department. We handle the permit filing when a new installation or post replacement requires one. You won’t have to sort out county paperwork on your own.
Yes. Every North Merrick job starts with a written price. You approve it before any work begins, and the number is the number. A written guarantee covering the repair for a full year is included, at no extra charge, because that’s how The Garrison Standard works.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Merrick Customers Say
"Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L.